T M    1 0 - 3 9 3 0 - 6 4 3 - 1 0 2  -  6 . LIFT  CONTROL  LEVER,  TILT  CONTROL  LEVER,  AND  FORK  CONTROL  LOCK. Legend 1. Lift control lever 2. Tilt control lever 3. Fork control lock a. Lift Control Lever (1). Controls the raising and lowering of the forks by moving back to raise the forks,   and moving forward to lower the forks. The lever will always return to hold when released attained  position. , and the forks will stay in the b. Tilt  Control  Lever  (2). Controls the tilting of the forks. c. Fork Control Lock (3). Moves over control levers to lock in neutral. 2 - 7 . SIDESHIFT,  OSCILLATE,  AND  FORK  POSITIONER  LEVER  (l). Controls  the  three following movements of the forks depending on the selection of the mode switch. a. Sideshift. Movement  of  the  lever lever in this mode will result in a shift of the entire fork carriage, either to the right or the left. Forward will shift to the left, and back will shift to the right. b. Oscillate. Movement of the lever in this mode will result in a rocking movement of the fork carriage with either the right or left fork being lower than the other. Forward will lower the left fork and back will lower the right fork. c.  Fork  Positioner. Movement of the lever in this movement of the forks, either away from each other, or Forward will move the forks away from each other, back will move the forks closer to each other. 2 - 1 0 TA327915 Legend 1. Three movement lever 2. Mode selector switch mode will result in a closer to each other.