| |
WARNING
TM
10-3930-643-10
2-2.
INSTRUMENT CONSOLE.-Continued
L e g e n d
1. Parking/emergency brake
control knob
2. Starting switch
3. Light switch
4. Bulb check switch
5. Ether start switch
6. Front service light switch
7. Rear service light switch
8. Engine fan switch
c.
Switches.
(1)
Parking/emergency
brake
control
knob
(1).
When the emergency brake is applied, be prepared for an
abrupt stop.
(a) Engage.
Pull the knob to set the parking brake. The parking brake
should be set any time the operator leaves the operator compartment. While the
parking brake is engaged, the parking brake warning light will be lit and the
warning
horn
will
sound , until the brake is released or the starting switch is
shut off.
Pull the knob to apply the
the
machine.
The machine
applied.
( b )
R e l e a s e .
P u sh
not release until there iS _
emergency brake, if the service brakes fail to stop
will stop abruptly when the emergency brake is
the button in to release the brakes. The brakes will
ample air pressure in the system.
(2) Starting switch (2).
L e g e nd
1. ACC
2. OFF
3. RUN
4. START
(a)
accessories
(b)
operated.
The ACC position (1).
Allows the use of added electrical
without the engine running.
OFF position (2).
Use
this
position
when
the
machine
is
not
being
RUN position (3).
Switch will return to this position automati-
(c)
cally when released from the START position.
Will remain in this position.
(d) START position (4).
Turn the switch to the far right to crank the
engine. Engine will not start unless the master disconnect switch is on.
2 -6
T A 3 2 7 9 11
|
