| |
TM
10-3930-643-10
1-21.
HYDRAULIC SYSTEM AND IMPLEMENTS.-Continued.
a.
Reservoir (1).
Provides hydraulic fluid supply for hydraulic system
and steering.
14.5 gallon capacity.
b.
Fork Carriage Cylinders and Controls.
(1) Lift control lever (2).
Permits fork carriage to be raised, lowered,
or held in position.
(2) Lift cylinder (3).
Raising and lowering of the fork carriage is
accomplished through the use of two hydraulic cylinders.
(3) Tilt control lever (4).
Permits fork carriage to be tilted back,
tilted forward, or held in position.
(4) Tilt cylinder (5).
Tilting of the fork carriage is accomplished
through the use of one hydraulic cylinder.
(5) Sideshift, oscillate, and fork positioner lever (6). Together with
the attached mode selector switch (7) permits the following lever positions:
. Forks apart
.
H o ld
. Forks together
.
Oscillate left side down
.
H o ld
. Oscillate right side down
.
Side shift left
.
Hold
. Side shift right
(6) Sideshift cylinder (8).
is accomplished through the use of
Left and right shifting of the fork carriage
one
cylinder.
(7) Oscillate cylinder (9).
Lowering of the left or right side of the
fork carriage is accomplished through the use of one cylinder.
(8) Fork positioner cylinders (10).
Spreading or closing of the forks is
accomplished through the use of two cylinders.
(9) Fork carriage (11).
Used to hold material while loading/unloading,
or transporting.
(10) Fork control lock (12).
Locks fork to prevent undesirable fork
movement during operation.
1-23 (1-24 blank)
|