TM 10-3930-643-10 3-5. TROUBLESHOOTING PROCEDURES.-Continued M A L F U N C T I ON TEST     OR     INSPECTION CORRECTIVE ACTION 2. ENGINE    CRANKS    BUT    FAILS    TO    START.-Continued Step     3. Drain    primary    fuel    filter    till    clear    fuel    flows    (S/N    2001    and above     only). If     procedure     fails     to     correct     malfunction,     refer     to organizational maintenance. 3. ENGINE     STARTS     BUT     WILL     NOT     CONTINUE     TO     RUN     OR     SHOWS     LOSS     OF     POWER. Step     1. Check to see if accelerator pedal is bent or binding. If    bent    or    binding,     notify    organizational    maintenance. Step     2. Check    for    broken,    leaking,    or    kinked    fuel    lines    and    hoses. If     fuel     lines     and     hoses     are     broken,     leaking,     or     kinked,     notify organizational maintenance. Step     3.     Drain     primary     fuel     filter     until     clear     fuel     flows     (S/N     2001     and above).     If     procedure     fails     to     correct     malfunction, refer     to organizational maintenance. 3 -6