| |
TM 10-3930-638-24&P
4-4. TRANSMISSION MAINTENANCE (cont)
h. Third Clutch Assembly (cont).
STEP
LOCATION
ITEM
ACTION
REMARKS
REASSEMBLY
24
Clutch piston
a. Outer clutch piston
Install and
Lubricate oil seal with OE10 (refer to
(12)
seal (13)
size
current lubrication order). To size
seal, rotate clutch piston while
holding a round object against new
seal as shown. Rotate clutch piston
until seal is flush with outer
diameter of clutch piston.
b. Inner clutch piston
Install and
Lubricate oil seal with OE10 (refer to
seal (14)
size
current lubrication order). To size
seal, rotate clutch piston while
holding a round object against new
seal as shown. Rotate clutch piston
ith outer
piston
NOTE
Seals must be sized before installing clutch piston into drum and
plug assembly (15).
CAUTION
Use care to not damage inner and outer seals.
25
Third clutch
a. Clutch piston (12)
Install
shaft drum and
b. Piston return spring
Position
plug assembly
(11)
(15)
c. Spring retainer (9)
Position
4-220
Change
1
|
