| |
TM 10-3930-638-24&P
4 - 4 . T R A N S M I S S I O N M A I N T E N A N C E ( c o n t)
g. Low Clutch Assembly (cont).
STEP
LOCATION
ITEM
ACTION
REMARKS
REASSEMBLY (oont)
26
Inner clutch piston
Install and
Lubricate oil seal with OE10 (refer to
seal (19)
size
current lubrication order). To size
seal, rotate clutch piston while
holding a round object against new
seal as shown. Rotate clutch piston
until seal is flush with outer
diameter of clutch piston
NOTE
Seals must be sized before installing clutch piston in low clutch
shaft drum and bleed valve assembly (20).
CAUTION
Don’t damage inner or outer seals.
27
Clutch piston (17)
Install
28
Piston return spring (16)
Position
29
Spring retainer (15)
Position
30
Retaining ring (14)
Position
Install sleeve in press; place low clutch as-
sembly on press and compress spring
retainer. Install retaining ring through
opening in sleeve as shown. Remove low
clutch assembly and sleeve from press
4-212
Change 1
|
