TM   10-3930-638-24&P 4 - 4 .    T R A N S M I S S I O N    M A I N T E N A N C E    ( c o n t) f. Reverse and Second Clutch Assembly (cont). STEP LOCATION ITEM ACTION REMARKS REASSEMBLY  (cont) e. Spring retainer (26), Compress piston spring (28) Clutch piston  (19) f. Retaining ring (27) Install g. Outer clutch disc (25) Install h. Inner clutch disc (24) Install i. Outer clutch disc (25), Install inner clutch disc (24) j. Clutch backing plate  (23) k. Retaining ring (22) a. Outer clutch piston seal (20) Use sleeve installed in press Install retaining ring through opening in sleeve;  remove  sleeve Install one, after applying light film of OE10 (refer to current lubrication order) Install one, after applying light film of EO10 (refer to current lubricatior order) Coat each disc lightly with OE10 grease (refer to current lubrication order). Position an outer disc (25) next to an inner disc (24) until all discs are installed. Last disc is an inner  disc Install Install Install and Size seal as described in step 10 above size b. Inner clutch piston Install  and Size seal as described in step 10 above seal (21) size NOTE Seals must be sized before installing clutch piston in drum and plug  assembly. 4-202 Change  1