TM  10-3930-638-24&P 4 - 4 .     T R A N S M I S S I O N     M A I N T E N A N C E     ( c o n t ) f. Reverse and Second Clutch Assembly (cont). STEP LOCATION ITEM ACTION REMARKS DISASSEMBLY (cont) 1 cont) 2 o. Piston return spring  spacer  (15) p. Retaining ring (16) q. Piston return spring  spacer  (15) r. s. t. u. v. Second a. clutch  side b. c. Five  piston  return springs  (17) Reverse  and  second shaft drum and plug assembly (18) Clutch piston (19) Outer clutch piston seal (20) Inner  clutch  piston seal (21) Retaining  ring  (22) Clutch disc backing plate  (23) Six inner clutch discs  (24) Compress Use  sleeve  (with  portion  removed)  install- ed in press, for removing retaining ring (16), piston return spring spacer (15), and  piston  return  springs  (17) Remove  and Through opening in sleeve discard Release and Carefully and slowly release pressure on remove sleeve Remove Invert Remove Tap reverse and second shaft drum and plug assembly (18) on block of wood to remove Remove  and discard Remove  and discard Remove  and discard Remove Remove 4-197