TM  10-3930-638-24&P 4 - 4 .     T R A N S M I S S I O N     M A I N T E N A N C E     ( c o n t) d. Gear and Clutch Group (cont). STEP LOCATION ITEM ACTION REMARKS DISASSEMBLY  (cont) 8 b. Bearing carrier (20) (cont) Remove Locating ring, bearing carrier, and associa- ted parts (21 through 26) are removed as 9 Bearing  carrier a. Bearing carrier (20) locating ring (18) b. Third clutch shaft pilot bearing (21) c. Retaining ring (22) d. Third clutch disc hub  (23) e. Retaining ring (24) f. Third clutch disc hub bearing (25) g. Locating ring (26) 10 Transmission a. Third clutch assem- housing,   rear bly (19) Remove  and discard Remove Remove  and discard Remove Remove  and discard Remove Remove  and discard Remove an assembly Use sleeve to remove Use sleeve to remove NOTE Refer  to  paragraph  4-4h  to  repair  third  clutch  assembly b. Piston ring outer Remove race (27) c. Roll pin (28) Remove d. High and low shift Remove Remove high and low shift fork and asso- fork (29) ciated parts (30 through 32) as an assem- bly; disengage from range shift hub (40) 4-175