| |
TM 10-3930-638-24&P
2-15. FUEL SYSTEM MAINTENANCE (cont)
f. Fuel Filter Assembly (cont).
STEP
LOCATION
ITEM
ACTION
REMARKS
REMOVAL/SERVICING (cont)
1 (cont)
CLEANING
2
INSPECTION
3
‘INSTALLATION
4
Engine, right
side
f.
g.
h.
i.
j.
k.
1.
Secondary filter (6)
Remove and
discard
Stud gasket (7)
Remove and
discard
Three cap screws (8)
and lock washers (9)
Hose clamp, fil-
Remove
ter supply hose,
and elbow
Fuel filter to in-
Disconnect
jection pump
tube
Elbow
Remove
Filter head (10)
Remove
Dry cleaning solvent (P-D-680), used to clean parts is toxic and
flammable. Wear protective goggles and gloves and use only in a
well ventilated area. Avoid contact with skin, eyes, and clothes
and don’t breathe vapors. Do not use near open flame or exces-
sive heat and don’t smoke when using it. Failure to do so could
cause serious injury. If you become dizzy while using cleaning
solvent, get fresh air immediately, and get medical attention. If
contact with skin or clothes is made, flush with large amounts of
water. If contact with eyes is made, wash eyes with water immedi-
ately, and obtain medical aid immediately.
Filter head
Clean
Use cleaning solvent P-D-680; dry thor-
oughly
Filter head
Inspect
Replace if cracked or threads damaged
a. Filter head
Position
On engine cylinder block
2-57
|
