TM  10-3930-638-24&P 4-4.   TRANSMISSION   MAINTENANCE   (cont) a. Torque Converter Group (cont). STEP LOCATION ITEM ACTION REMARKS REASSEMBLY  (cont) 23 Auxiliary  pump a. Bearing (44) Install drive  gear b. Retaining ring (43) Install 24 Bearing a. Locating ring (45) Install support b. Pump drive gear (42) Install 25 Converter a. Bearing support (46) Install housing and  auxiliary  pump drive  gear  (42) b. Two screws (40) Install Snug screws to hold bearing support in and lock washers (41) place, then tighten to 23-25 pounds foot torque 26 Pump drive a. Bearing (37) Install gear b. Retaining ring (36) Install 27 Bearing  sup- s. Locating ring (38) Install port (39) b. Pump drive gear (35) Install Install until gear shoulders on locating ring c. Locating ring (34) Install 28 Converter a. Bearing support (39) Position housing and pump drive gear (35) b. Three screws (33) Install Snug screws to hold bearing support and and lock washers (55) gear in place, then tighten to 23-25 pounds toot  torque 29 Idler  gear a. Locating ring (32) Install On stub shaft b. Bearing (31) Install c. Retaining ring (29 Install and 30) d. Idler gear (28) and Position bearing (31) e. Locating ring (27) Install 4-146