| |
TM 10-3930-638-24&P
4-3. FUEL SYSTEM MAINTENANCE (cont)
b. Fuel Injection Pump (cont).
STEP
LOCATION
ITEM
ACTION
REMARKS
DISASSEMBLY (cont)
4
Governor
a. Two nuts (13)
Remove
control
b. Washer (14),
Remove
cover (22)
grounding strap
(15), and lock
washers (16 and
17)
c. Two nuts (18),
Remove
Support solenoid frame and arm assembly
washers (19),
(24)
and insulating
washers (20)
d. Solenoid frame
Remove
and arm
assembly (24)
e. Connector (21)
Remove
5
Housing, top
a. Screw (25) and
Remove
spring retainer (26)
b. Throttle lever
Disengage and
spring (27)
remove
c. Throttle lever
Remove
assembly (28)
d. Spacer adjusting
Remove
arm (29)
e. Screw (30)
Remove
f. Spacer (31)
Remove
g. Shaft retainer
Remove
Rotate shut-off shaft to full shut-off posi-
clip (32)
tion (clip horizontal). Use tool P/N 13339
placed between housing and governor link-
age hook as shown, pry gently sliding clip
out of i s groove and off throttle shaft
4-93
|
