TM 10-3930-638-24&P 2-15. FUEL SYSTEM MAINTENANCE (cont) c. Au Cleaner  (cont). STEP LOCATION ITEM ACTION REMARKS CLEANING/SERVICING WARNING Wear safety glasses when drying parts with compressed air. Fail- to do so could cause serious injury to eyes and possible blindness. If you hurt your eyes or if a foreign object is blown into your eyes, seek medical   attention   immediately. 8 Filter  element Clean  and Use compressed air directed inside ele- (21) wash ment 9 Baffle (18) and Clean Rinse with water. Dry throughly with evaluator (19) compressed air WARNING Dry cleaning solvent (P-D-680), used to clean parts is toxic and flammable. Wear protective goggles and gloves and use only in a well ventilated area. Avoid contact with skin, eyes, and clothes and don’t breathe vapors. Do not use near open flame or exces- sive heat and don’t smoke when using it. Failure to do so could cause  serious  injury.  If  you  become  dizzy  while  using  cleaning solvent, get fresh air immediately, and get medical attention. If contact with eyes is made, wash eyes with water immediately, and  obtain  medical  aid  immediately. 10 All  other  parts Clean Use  cleaning  solvent  P-D-680.  Dry thoroughly with compressed air INSPECTION Filter  element Inspect Place light inside filter element. Replace 11 (21) element  if  clogged,  damaged,  to tom, has holes or if gasket on end of element  is  damaged 12 All  other  parts Inspect Replace if damaged, cracked, dented worn,  distorted  or  clogged REASSEMBLY 13 Tube  (24) Cap (22) 14 Body  (25) a. Tube (24) b. Clamp (23) c.  Filter  element (21) Install Install Install Install Insert  open  end  first 2-47