| |
TM 10-3930-638-24&P
4-2. ENGINE MAINTENANCE (cont)
f. Pistons and Connecting Rods (cont).
3
STEP
LOCATION
ITEM
ACTION
REMARKS
REMOVAL (cont)
b. Two connecting
Remove
Turn crankshaft to gain access
(cont)
rod nuts (1)
to connecting rod caps (2)
c. Connecting rod
Remove and
cap (2)
set aside
d. Connecting rod
Push up
Use wooden dowel to push connecting rod
(3)
up through block
4
Cylinder block,
a. Piston (4) and
Remove
top
connecting rod (3)
b. Connecting rod
Install
On corresponding connecting rod to avoid
cap (2) and two
mixing caps (2)
nuts (1)
c. Piston sleeve
Secure
Install cap screw (FSCM 10988 P/N 13-820)
and washer (FSCM 10988 P/N 95-8) in
cylinder block to hold sleeve in position
NOTE
Repeat steps 3 and 4 above for three remain-
ing connecting rods (3).
Change 1 4-43
|
