TM  10-3930-638-24&P 3-30.   HYDRAULIC   LIFT   SYSTEM   MAINTENANCE   (cont) b. Tilt Cylinder Assemblies (cont). STEP LOCATION ITEM ACTION REMARKS DISASSEMBLY  (cont) c.  Gland  assembly  (21) Loosen d. Rod (31), gland assem- Remove as an bly (21), and piston assembly assembly (16) e. Cap screw (14) and Remove washer  (15) f. Piston assembly (16) Remove g.  Gland  assembly  (21) Remove 3 Piston a. Two wear rings (17) Remove  and  dis- assembly (16) card b. Seal (18) Remove  and  dis- card c. Seal loader ring (19) Remove  and  dis- card 4 Gland assembly a. Plug (22) Remove  only  if (21) damaged b. O-ring (23) Remove  and  dis- card c. Back-up ring (24) Remove  and  dis- card d. Seal (25) Remove  and  dis- card e. Wiper (26) Remove  and  dis- card f. Bearing (27) Remove  and  dis- Use  1-1/2  inches  diameter  sleeve;  remove card from rod end. Bearing (27) and ring (28) will both be removed g. Retaining ring (28) Remove 5 Rod  (31) Bushing  (30) Remove  only  if Use  1-9/16  inches  diameter  sleeve worn  or  damaged 6 Cylinder  (33) Bushing  (32) Remove  only  if Use  1-9/16  inches  diameter  sleeve worn  or  damaged 3-221