TM    10-3930-638-24&P 3-24. STEERING SYSTEM MAINTENANCE (cont) d.  Steering  Cylinder  Assembly  Repair  (cont). STEP LOCATION ITEM ACTION REMARKS DISASSEMBLY 1 Cylinder  (18) a. Screw (1) Loosen  and remove b. Gland (2) Loosen Loosen  using  spanner  wrench  (FSCM 10988  P/N  D44113) c. Piston rod (3) Pull and From  cylinder  (18) with gland (2) remove 2 Piston a. Cap screw (4) Loosen  and rod (3) and  washer  (5) remove b. Piston (6) Pull and remove From piston rod (3) C. Gland (2) Pull and remove From piston rod (3) NOTE Remove grease fitting (14), retaining ring (15) and bushing (16) only if necessary for replacement. d. Grease fitting (14) Loosen  and remove e.  Two  retaining Remove Use  snap  ring  pliers rings  (15) f. Bushing (16) Remove From piston rod eye 3 Piston (6) a. Wear ring (7) Remove  and discard b. Seal ring (8) and Remove  and O-ring (9) discard 4 Gland (2) a. O-ring (10) and Remove  and back-up ring (11) discard b. Wiper (12) and Remove  and Use a fine wire to hook wiper and rod seal rod seal (13) discard and pull out of gland 5 Cylinder  (18) Two bushings (17) Remove If  necessary  for  replacement 3-186