TM  10-3930-638-24&P 3-20. AXLES AND DIFFERENTIAL CARRIER ASSEMBLIES MAINTENANCE (cont) d. Rear Axle Differential Carrier Assembly (cont). STEP LOCATION ITEM ACTION REMARKS INSTALLATION (cont) 6 NOTE (cont) Be sure you install correct size cap screw in mounting hole as shown in illustration in following step. d. Four cap screws and Install  equally washers spaced  and  tighten alternately to draw  assembly into housing bore e. 12 cap screws and Install as shown washers NOTE Tighten 7/16-14 cap screws to 70-80 pounds foot torque; tighten 1/2-13 cap screws to 110-130 pounds foot torque. f. Roller jack Remove  from  under axle   housing g. Drain plug Install 3-150