TM  10-3930-638-24&P 3-20.   AXLES   AND   DIFFERENTIAL   CARRIER   ASSEMBLIES   MAINTENANCE   (cont) c. Front Axle Differential Carrier Assembly (cont). STEP LOCATION ITEM ACTION REMARKS INSTALLATION  (cont) NOTE Be sure you install correct size cap screw in mounting hole as shown in  illustration  in  following  step. d. Four cap screws and Install equally washers spaced and tighten alternately  to draw assembly into  housing bore e. 12 cap screws and Install as shown washers NOTE Tighten 7/16-14 cap screws to 70-80 pounds foot torque; tighten 1/2-13 cap screws to 110-130 pounds foot torque. f. Roller jack Remove from under axle  housing g. Drain plug Install 3-145