TM  10-3930-638-24&P 3-20.  AXLES  AND  DIFFERENTIAL  CARRIER  ASSEMBLIES  MAINTENANCE  (cont) c. Front Axle Differential Carrier Assembly. This task covers: a. Removal b. Axle housing cleaning INITIAL   SETUP TOOLS No. 1 Common Organiza- NSN  4910-00-754-0654 tional  Maintenance  Tool  Kit Roller Jack, 1/4 ton capacity Jack Stands, 4 ton capacity Container,  4  gallon  capacity Hard Wooden Blocks (2). c.  Axle  housing  inspection d.  Installation EQUIPMENT   CONDITION Paragraph Condition Description Vehicle  parked  on  level  surface,  engine off, wheels blocked, and parking brake applied. 2-4b(1) Shipping  lock  pin  installed. 2-39a Front  drive  shaft  assembly  disconnected 6  by  6  by  18  inches from  front  axle  assembly  differential companion  yoke. MATERIALS/PARTS 2-43b, step 5 Brake  line  removed. Cleaning  solvent  P-D-680 Clean  cloths Sealer (FSCM 78500 P/N 1199Q2981) Moisture  free  compressed  air Crocus cloth STEP LOCATION ITEM ACTION REMARKS REMOVAL 1 Axle housing, a. Container Place under drain Drain  lubricant  into  4  gallon  container bottom plug b. Drain plug Remove  and  drain lubricant c.  Container Remove Discard lubricant 3-142