| |
TM 10-3930-638-24&P
3-7. RADIATOR AND SHROUD MAINTENANCE
This task covers: a.
Cleaning
b. Inspection
c.
Repair
INITIAL SETUP
TOOLS
EQUIPMENT CONDITION
Automotive Mechanic’s
NSN 5180-00-754-0641
Paragraph
Condition Description
Tool Kit
2-17c
Radiator and shroud removed.
MATERIALS/PARTS
Cleaning compound
NSN 6850-00-598-7328
Cleaning solvent P-D-680
Clean cloths
STEP
LOCATION
ITEM
ACTION
REMARKS
CLEANING
Use alkaline cleaning compound only in a well ventilated area.
Avoid inhaling of fumes or contact with skin. Failure to do so
could cause serious injury. If you inhale fumes, get fresh air
immediately. If contact with skin or clothes is made, flush with
large amounts of water and obtain medical aid immediately.
1
Radiator
Clean
Use alkaline immersion process with
cleaning compound. After cleaning,
thoroughly rinse with water to remove
all traces of cleaning compound
WARNING
Dry cleaning solvent (P-D-680), used to clean parts is toxic and
flammable. Wear protective goggles and gloves and use only in a
well ventilated area. Avoid contact with skin, eyes, and clothes
and don’t breathe vapors. Do not use near open flame or
excessive heat and don’t smoke when using it. Failure to do so
could cause serious injury. If you become dizzy while using
cleaning solvent, get fresh air immediately, and get medical
attention. If contact with skin or clothes is made, flush with large
amounts of water. If contact with eyes is made, wash eyes with
water immediately, and obtain medical aid immediately.
NOTE
Radiator exterior and cooling fins may also be cleaned using
cleaning solvent P-D-680. Dry thoroughly, and rinse with clear
water to-remove all traces of cleaning solvent.
3-86
|
