TM  10-3930-638-24&P 3-5.   ENGINE   MAINTENANCE   (cont) f. Tachometer Drive (cont). STEP LOCATION ITEM ACTION REMARKS REMOVAL  (cont) 1 a. Tachometer drive Remove Turn counterclockwise and lift from (cont) cover tachometer  drive b. Tachometer drive Install Turn clockwise on tachometer drive removal tool threads c. Removal tool nut Tighten Use open end wrench. Turn nut clockwise as shown until tachometer drive is pulled from  engine d. Tachometer drive Remove Turn counterclockwise and lift from removal tool tachometer  drive CLEANING WARNING Dry cleaning solvent (P-D-680), used to clean parts is toxic and flammable. Wear protective goggles and gloves and use only in a well  ventilated  area.  Avoid  contact  with  skin,  eyes,  and  clothes and don’t breathe vapors. Do not use near open flame or excessive heat and don’t smoke when using it. Failure to do so could cause serious injury. If you become dizzy while using cleaning  solvent,  get  fresh  air  immediately,  and  get  medical attention. If contact with skin or clothes is made, flush with large amounts of water. If contact with eyes is made, wash eyes with water  immediately,  and  obtain  medical  aid  immediately. , i 3-51

Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business