TM  10-3930-638-24&P 2-56.   HYDRAULIC   LIFT   SYSTEM   MAINTENANCE   (cont) g. Hydraulic Reservoir (cont). (3)  Strainer  (cont). STEP LOCATION ITEM ACTION REMARKS REMOVAL 1 Engine  compart- a.  Hose  clamp Loosen ment,  front b. Hose Disconnect from Prevents entry of dirt elbow and cap c. Elbow Remove  from strainer d.  Strainer Remove CLEANING WARNING Dry cleaning solvent (P-D-680), used to clean parts is toxic and flammable.  Wear  protective  goggles  and  gloves  and  use  only  in  a well ventilated area. Avoid contact with skin, eyes, and clothes and don’t breathe vapors. Do not use near open flame or exces- sive heat and don’t smoke when using it. Failure to do so could cause serious injury. If you become dizzy while using cleaning solvent, get fresh air immediately, and get medical attention. If contact with skin or clothes is made, flush with large amounts of water. If contact with eyes is made, wash eyes with water immed- iately,  and  obtain  medical  aid  immediately. Strainer Clean by immers- ing in cleaning solvent  P-D-680 and dry using clean  cloth INSTALLATION 3 Engine  compart- a.  Strainer Install ment b. Elbow Install  in  strainer c. Hose Connect to elbow d.  Hose  clamp Tighten 4 Hydraulic Hydraulic  reservoir Fill with oil to Refer  to  current  lubrication  order reservoir fill between FULL and ADD marks on dipstick 2-448