| |
TM 10-3930-638-24&P
2-56. HYDRAULIC LIFT SYSTEM MAINTENANCE (cont)
f. Hoses, Lines and Fittings (cont).
(1) Hydraulic Oil Filter Assembly to Control Valve to Mast Assembly (cont).
STEP
LOCATION
ITEM
ACTION
REMARKS
INSTALLATION/REPLACEMENT (cont)
17
Engine compart-
a. Tube assembly (75)
Position between
ment, front
oil filter head
and front of rear
chassis
b. Tube fitting (74)
Connect to oil
filter head and
tighten
18
Rear chassis,
a. Clamp (73)
Position on tube
front
assembly (75)
b. Cap screw (69)
Install
Secures clamp (73) to chassis
c. Washer (72), lock
Install
Secures screw and clamp to chassis
washer (71), and
nut (70)
d. Hose assembly (68)
Position between
tube assembly
(75) and tee
located on relief
valve
e. Tube fitting (67)
Connect to hose
(68) and tighten
19
Front chassis,
a. Clamp (66)
Position on hose
bottom right
assembly (68)
side
b. Cap screw (62)
Install
Secures clamp (66) to chassis
c. Washer (65), lock
Install
Secures screw and clamp to chassis
washer (64), and nut
(63)
d. Hose fitting
Connect to tee
located on relief
valve. Tighten
e. Hose assembly (60)
Position between
tee located on
relief valve and
operator’s
compartment
f. Clamp (59)
Position on hose
(60) and secure
to right side of
accelerator
pivot base
g. Hose fitting (58)
Connect to tee
located on relief
valve and
tighten
2-425
|