| |
TM 10-3930-638-24&P
2-56. HYDRAULIC LIFT SYSTEM MAINTENANCE (cont)
d. Lift Chains and Pulleys (cont).
STEP
LOCATION
ITEM
ACTION
REMARKS
REMOVAL (cont)
(cont)
f. Two step bolts (9)
Remove
g. Four washers (10)
Remove
h. Two hose pulleys (11)
Remove
NOTE
Don’t perform following step unless inspection indicates bushing
(12) requires replacement.
i. Bushing (12)
Remove; use 13/16 inch diameter sleeve
j. Six washers(13)
Remove
k. Four cap screws (14)
Remove
Lock washers (15) used on serial
and lock washers (15)
number 9150572 and below
l. Pulley bar (16)
Remove
m. Washer (17)
Remove
n. Chain pulley (18)
Remove
NOTE
Don’t perform following step unless inspection indicates bearing
(19) requires replacement.
o. Bearing (19)
Remove; use 2-7/32 inch diameter sleeve
Change 2 2-405
|
