| |
TM 10-3930-638-24&P
2-53. BODY, CAB AND HOOD MAINTENANCE (cont)
i. Chassis Floor Plate and Guard (cont).
STEP
LOCATION
ITEM
ACTION
REMARKS
INSPECTION
4
Cap screws (4 and 6),
Inspect
Replace if worn, or if threads damaged
hex nuts (1), and
washers (2, 3, 7 and 8)
5
Guard (5) and floor
Inspect
Repair small cracks by welding. Replace
plate (9)
if severely cracked or damaged
INSTALLATION
6
Operator’s com-
a. Chassis floor plate (9)
Position
Guide slots on floor plate over pedals
partment floor
and lower onto chassis
b. Six washers (8), lock
Install and
Until floor plate is securely mounted
washers (7), and
tighten
cap screws (6)
7
Bottom of front
a. Guard (5)
Position
Use hydraulic jack, blocks or assistants
chassis
to hold guard against bottom of chassis
b. Four cap screws (4),
Install and tighten Until guard is securely mounted
washers (3), lock
washers (2), and
hex nuts (1)
2-388
|