TM  10-3930-638-24&P 2-53.   BODY,   CAB   AND   HOOD   MAINTENANCE   (cont) d. Top Hood (cont). STEP LOCATION ITEM ACTION REMARKS REMOVAL 1 Engine  compart- a. 18 cap screws ( 1 and 2), Remove ment washers (3), and lock washers  (4) b. Top hood (5) Remove CLEANING WARNING Dry cleaning solvent (P-D-680), used to clean parts is toxic and flammable. Wear protective goggles and gloves and use only in a well ventilated area. Avoid contact with skin, eyes, and clothes and don’t breathe vapors. Do not use near open flame or exces- sive heat and don’t smoke when using it. Failure to do so could cause serious injury. If you become dizzy while using cleaning solvent,  get  fresh  air  immediately.  and  get  medical  attention.  If contact with skin or clothes is made, flush with large amounts of water. If contact with eyes is made, wash eyes with water immed- iately,  and  obtain  medical  aid  immediately. 2 All parts Clean Use cleaning solvent P-D-680. Dry thoroughly. Remove any rust with stiff wire brush INSPECTION 3 Replace if cracked, damaged, bent, distorted  or  threads  damaged INSTALLATION 4 Engine  compart- a. Top hood (5) Position ment, top b. 18 lock washers (4), install washers (3), and cap screws (2 and 1) c. Exhaust pipe Install All parts Inspect Para 2-16 2-374