| |
TM 10-3930-638-24&P
2-53. BODY, CAB AND HOOD MAINTENANCE (cont)
c. Side Panels (cont).
STEP
LOCATION
ITEM
ACTION
REMARKS
CLEANING
WARNING
Dry cleaning solvent (P-D-680), used to clean parts is toxic and
flammable. Wear protective goggles and gloves and use only in a
well ventilated area. Avoid contact with skin, eyes, and clothes
and don’t breathe vapors. Do not use near open flame or exces-
sive heat and don’t smoke when using it. Failure to do so could
cause serious injury. If you become dizzy while using cleaning
solvent, get fresh air immediately, and get medical attention. If
contact with skin or clothes is made, flush with large amounts of
water. If contact with eyes is made, wash eyes with water immed-
iately, and obtain medical aid immediately.
4
All parts
Clean
Use cleaning solvent P-D-680. Dry
thoroughly
INSPECTION
5
All parts
Inspect
Replace if damaged, cracked, bent,
distorted or threads damaged
REASSEMBLY
6
Left or right
a. Two anchor brackets
Position
side
(17)
b. Two lock washers (16), Install
screws (15), and
nuts (14)
c. Two hood panel hooks
Position
(13)
d. Two anchor pins (12)
Install
e. Two cotter pins (11)
Install
f. Two lock washers (10)
Install
and hood panel
handle (9)
g. Two washers (8) and
Install
cap screws (7)
INSTALLATION
7
Left or right
a. Two hood panel lock
Position
side of vehicle,
brackets (6)
chassis
b. Four lock washers (5),
Install
cap screws (4), washers
(3), and nuts (2)
8
Engine compart-
a. Side panel (1)
Install
ment, left or
b. Hood panel hook (13)
Pull down and
right side
engage in lock
bracket (6)
Force into position
2-372
|
