TM  10-3930-638-24&P 2-50.   FRAME   AND   TOWING   ATTACHMENTS   TROUBLESHOOTING   (cont) MALFUNCTION TEST  OR  INSPECTION CORRECTIVE ACTION 3. TOW BAR DOES NOT PIVOT OR LATCH Step  1. Check chassis where tow bar is attached for obstructions. a.  If  obstructed,  remove  obstruction. b. If not obstructed, proceed to step 2 Step 2. Check chassis, tow bar, and mounting hardware for cracks or dents. a. If tow bar is dented or cracked, replace (para 2-52c). b. If tow bar is okay, proceed to step 3. Step 3. Check tow bar bracket for loose mounting, dents, or cracks. Tighten mounting hardware; replace bracket if cracked or dented (para 2-52c). 2-51.   BODY,   CAB   AND   HOOD   TROUBLESHOOTING MALFUNCTION TEST  OR  INSPECTION CORRECTIVE ACTION 1. SIDE PANEL DOES NOT LATCH Step 1. Inspect hood panel lock bracket on chassis for damage, dents or missing condition. Check for loose mounting hardware. a. Replace hood panel lock bracket (para 2-53c), if damaged or dented; tighten loose mounting hardware. b. If bracket is okay and hardware is tight, proceed to step 2 Step  2.  Check  hood  panel  hook  for  damage,  cracks,  or  missing  condition. Check hook for unrestricted movement. a. If hood panel hook is damaged, cracked or missing, replace (para 2-53c). b. If hood panel hook is okay, proceed to step 3 below. Step 3. Check side panels for damage or dents. Replace  side  panels  if  damaged  or  dented. 2-353