| |
TM 10-3930-638-24&P
2-48. STEERING SYSTEM MAINTENANCE (cont)
c. Steering Cylinder Assembly (cont).
STEP
LOCATION
ITEM
ACTION
REMARKS
CLEANING
WARNING
Dry cleaning solvent (P-D-680), used to clean parts is toxic and
flammable. Wear protective goggles and gloves and use only in a
well ventilated area. Avoid contact with skin, eyes, and clothes
and don’t breathe vapors. Do not use near open flame or
excessive heat and don’t smoke when using it. Failure to do so
could cause serious injury. If you become dizzy while using
cleaning solvent, get fresh air immediately, and get medical
attention. If contact with skin or clothes is made, flush with large
amounts of water. If contact with eyes is made, wash eyes with
water immediately, and obtain medical aid immediately.
2
All parts
INSPECTION
3
Hose clamps (2) and
steering cylinder guard
(3)
4
Hose fittings (4 and 6)
5
Elbows (5 and 7)
6
Retaining rings (8 and 10)
and pins (9 and 11)
7
Steering cylinder
assembly (12)
INSTALLATION/REPLACEMENT
8
Side of vehicle
a. Steering cylinder
assembly (12)
b. Pin (11)
c. Retaining ring (10)
d. Pin (9)
e. Retaining ring (8)
f. Elbow (7)
g. Hose fitting
(6)
h. Elbow (5)
Clean
Inspect
Inspect
Inspect
Inspect
Inspect
Position
Install
Install
Install
Install
Install
Connect and
tighten
Install
Use cleaning solvent P-D-680
Replace if damaged
Replace hose assembly if threads damaged
Replace if cracked, distorted, or threads
damaged
Replace if cracked, bent, or distorted
Replace if cracked or distorted. Check
internal threads for damage; chase using
9/16-18 UNF tap
2-350 CHANGE 2
|