TM  10-3930-638-24&P 2-48.   STEERING   SYSTEM   MAINTENANCE   (cont) b. Hoses, Lines and Fittings (cont). (2) Hydraulic Pump to Steering Gear (cont). STEP LOCATION ITEM ACTION REMARKS INSTALLATION/REPLACEMENT (cont) 15 b. Hose fitting (29) Connect  and (cont) tighten c. Relief valve (28) Position on chassis d. Two cap screws (27) Install e. Two washers (26). lock Install washers (25), and nuts (24) f. Adapter (23) Install g. Tube assembly (22) Position h.  Clamp  (21) Position on tube assembly  (22) i. Cap screw (20) Install j. Washer ( 19), lock Install washer (18), and nut (17) k. Tube fitting (16) Connect  to  elbow (30) and tighten 1. Tube fitting (15) Connect to adapter  (23)  and tighten m.  Adapter  (14) Install in relief valve (28) n. Hose assembly (13) Position o. Hose fitting ( 12) Connect  and tighten p.   Tee(n) Install q. Hose fitting (7) Connect  and tighten r. Hose fitting (9) Connect  and tighten 16 Operator’s a. Tube assembly (6) Position compartment, b. Tube fitting (5) Connect  and control  valve tighten 17 Operator’s a. Adapter (4) Install compartment, b. Tube fitting (3) Connect  and steering tighten gear c. Adapter (2) Install d. Tube fitting (1) Connect 18 Hydraulic Oil  level  dipstick  and  fill Fill with oil Para 2-56g(1) reservoir 2-344