| |
TM 10-3930-638-24&P
2-48. STEERING SYSTEM MAINTENANCE (cont)
b. Hoses, Lines and Fittings (cont).
(2) Hydraulic Pump to Steering Gear (cont).
STEP
LOCATION
ITEM
ACTION
REMARKS
CLEANING (cont)
5
All parts
Clean
Use cleaning solvent P-D-680
INSPECTION
6
Hose fittings ( 1,7,9,12,29,
Inspect
Replace hose assembly (8. 10,13 or 31) if
and 31)
damaged
7
Tube fittings (3,5, 15 and
Inspect
Replace tube assembly (6 and 22) if
16)
damaged
8
Hose assemblies (8, 10,13
Inspect
Replace if cracked, split, or fitting threads
and 32) and hose (35)
damaged. If necessary, make hose (35)
from FSCM 24161 PIN 24 VW; cut to
23 inches long
9
Adapters (2, 14, and 23)
Inspect
Replace if cracked, distorted, or threads
connectors (4 and 33),
damaged
tee (11 ), and elbows (30
and 36)
10
Tube assemblies (6 and
Inspect
Replace if cracked, kinked, dented,
22)
twisted, or fitting threads damaged
11
Clamp (21)
Inspect
Replace if bent or cracked
12
Relief valve (28)
Inspect
Replace if cracked or threads damaged
13
Hose clamps (34)
Inspect
Replace if damaged
INSTALLATION/REPLACEMENT
14
Engine compart-
a. Elbow (36)
Install in
ment
hydraulic
reservoir
b. Two hose clamps (34)
Position on both
ends of hose (35)
c. Hose (35)
Install
d. Hose clamps (34)
Tighten both
e. Connector (33)
Install in
hydraulic pump
f. Hose assembly (32)
Position
g. Hose fitting (31)
Connect and
tighten
15
Front chassis,
a. Elbow (30)
Install in brake
bottom right side
valve ports
2-343
|