TM  10-3930-638-24&P 2-43. SERVICE BRAKE MAINTENANCE (cont) b. Brake Hoses, Lines and Fittings (cont). STEP LOCATION ITEM ACTION REMARKS REMOVAL 1 Front  chassis, a.  Two  connector  bolts  (1)  Loosen  and  remove  From  hydraulic  brake  valve bottom left side b. Two fittings (3) and Remove four gaskets (2 and 4) 2 Rear chassis, a. Nine tie straps (5) Cut and remove From hoses (6 and 16) bottom center b. Brake hose (6) Loosen  and  remove 3 Front chassis, a. Hose (7), tee (8) and Loosen  and  remove bottom left side fitting (9) b. Nut (10), lock washer Remove From clamp (13) (11) and cap screw (12) c. Clamp (13) Spread and remove From tube (14) d. Tube (14), two fit- Loosen and remove From declutch valve tings (15) and hose (16) 4 Engine  compart- a. Hose (16) Loosen and dis- From tee (17) ment, left front connect b. Tee (17) and plug (18) Remove From transmission control valve 5 Front chassis, a. Brake tube (19) Loosen and dis- bottom left and connect center b. Tube clamp (20) Remove c. Brake tubes (21 and Remove 22) and strap tee (23) 6 Rear  chassis, a. Nut (10), lock washer Remove From clamp (13) bottom  center (11) and cap screw (12) b. Clamps(13 and 20) Spread and remove From hose (6) and tube (21) c. Hose (6) and brake Remove tubes (21 and 22) d. Strap tee (23) Remove 2-292