| |
TM 10-3930-638-24&P
2-43. SERVICE BRAKE MAINTENANCE (cont)
a. Service Brake Assembly (cont).
1
7
STEP
LOCATION
ITEM
ACTION
REMARKS
BLEEDING BRAKES (cont)
c. Bleeder valve Momentarily
Turn counterclockwise until
(cont)
open
brake pedal nears bottom of
travel then turn clockwise
t o c l o s e
NOTE
Repeat steps b and c above until a steady stream of brake fluid
flows from open bleeder valve when brake pedal is depressed.
18 Operator-s
a. Brake valve
Remove
compartment
f i l l p l u g
b. Brake valve
R e f i ll
With silicone brake fluid,
MIL-B-46176, to within ½
inch of fill plug opening.
f . F i l l p l ug
I n s t a ll
NOTE
Repeat steps 17 and 18 above at remaining bleeder valves in
following order:
Left rear
Right front
Left front
19 Transmission
a. Plug
Tighten
control valve b. Declutch
Hold down
Use assistant
pedal
c. Plug
Momentarily
Turn counterclockwise then
open
clockwise to close when air
is removed from line
NOTE
Repeat steps b and c above until a steady stream of brake fluid
flows from loosened plug.
Repeat step 18 above to fill brake valve with brake fluid.
Change 3 2-289
|