TM  10-3930-638-24&P 2-42. PARKING BRAKE MAINTENANCE (cont) a. Parking Brake Linkage (cont). STEP LOCATION ITEM ACTION REMARKS INSTALLATION/REPLACEMENT   (cont) 13 Parking  brake a. Adjusting nut (10) Loosen Until just held onto cable by three or cable (8) four  threads b. Adjusting nut (9) Adjust Until just touches top of clevis 14 Parking brake a. Parking brake cable (8) Position clevis on Clevis on threaded end of cable (8) actuating lever actuating lever; connects  to  actuating  lever align holes b. Clevis pin (24) Install Connect  parking  brake  cable  (8)  clevis to actuating lever c. Washer (23) Position d. Cotter pin (22) Install Bend over end 15 Transmission, a. Plate (21) Position Between parking brake cable (8) and left  side,  above bracket (27) parking  brake b. U bolt (20) Install Secures parking brake cable (8) and plate (21) c. Two lock washers (19) Install and nuts (18) 16 Operator’s com- a. Clamp (17) Install  and On  parking  brake  cable  (8) partment, rear position b. Cap screw (16) Install Secures clamp (17) to rear chassis c. Lock washer (15) and Install nut (14) 17 Parking  brake a. Parking brake cable (8) Position In lever (4); align holes in clevis and lever lever (4) clevis b. Pin (7) Install Connects  clevis  and  lever  (4) c. Washer (6) Position d. Cotter pin (5) Install Bend over end e. Cap screw (3) Position In parking brake lever just far enough to install spacers (11) on cap screw f. Two spacers (11) Position On cap screw (3) g. Clamp (12) and clamp Position  and On parking brake cable (8), then install in spacer (13) install parking brake lever (4) threading screw through spacer (11), clamp (12) and clamp spacer (13) 18 Operator’s com- a. Parking brake lever (4) Position partment b. Two lock washers (2), Install cap screws (3) and nuts (1) 2-274