TM  10-3930-638-24&P 2-38.   TRANSMISSION   MAINTENANCE   (cont) b.  Transmission  Linkage  Controls  (cont). STEP LOCATION ITEM ACTION REMARKS ADJUSTMENT (cont) 21 c. Adjust as follows: (cont) (1) Remove nut (1) and lock washer (2) (2) Detach ball joint (3) (3) Loosen nut (25) (4) Adjust ball joint (3) by threading onto or out of cable  (53) (5) Tighten nut (25) (6) Install ball joint (3) (7) install lock washer (2) and nut (1) (8) Measure clearance (step b above) d. Move lever into first (1) and third (3) speed positions. Full detent shall be achieved. 2-221