TM  10-3930-638-24&P 2-38.   TRANSMISSION   MAINTENANCE   (cont) STEP LOCATION ITEM ACTION REMARKS REMOVAL (cont) 3 Engine  compart- Cables (53, 54) Mark  for  proper ment installation 4 Link (31) a. Four nuts (26) Remove b. Four lock washers (27) Remove c. Four washers (28) Remove d. Four spacers (29) Remove e. Four cap screws (30) Remove NOTE Remove four nuts (26), lock washers (27), washers (28), spacers (29) and cap screws (30) from two links (31). 5 Outer  bellcrank a. Two links (31) Remove (38), inner bell- b. Two cotter pins (32) Remove crank (39) c. Two clevis pins (33) Remove d. Two clevises (34) Slide off and remove e. Two nuts (35) Remove 6 Transmission a. Two nuts (36) Remove b. Washer (37) Remove c. Outer bellcrank (38) Remove d. Inner bellcrank (39) Remove e. Spacer (40) Remove f. Stud (41) Remove g. Two cap screws (42) Remove h. Two lock washers (43) Remove i. Cable bracket (44) Remove 7 Operator’s com- a. Four nuts (45) Remove partment,  under b. Four lock washers (46) Remove floor panel c. Three spacers (47) Remove d. Four cap screws (48) Remove e. Washer (55) Remove f.  Clamp  (49) Remove g. Two cable hold down Remove plates (50) h. Two cable clamps (51) Remove i. Two tie straps (52) Remove j. Two cables (53 and 54) Remove b.  Transmission  Linkage  Controls  (cont). 2-216