| |
TM 10-3930-638-24&P
2-38. TRANSMISSION MAINTENANCE (cont)
a. Transmission Servicing and Inspection (cont).
(2) Screen Assembly (cont).
STEP
LOCATION
ITEM
ACTION
REMARKS
REMOVAL
1
Transmission
a. Screen asssembly
Remove
b. Gasket
Remove and
discard
CLEANING
WARNING
Dry cleaning solvent (P-D-680), used to clean parts is toxic and
flammable. Wear protective goggles and gloves and use only in a
well ventilated area. Avoid contact with skin, eyes, and clothes
and don’t breathe vapors. Do not use near open flame or exces-
sive heat and don’t smoke when using it. Failure to do so could
cause serious injury. If you become dizzy while using cleaning
solvent, get fresh air immediately, and get medical attention. If
contact with skin or clothes is made, flush with large amounts of
water. If contact with eyes is made, wash eyes with water immedi-
ately, and obtain medical aid immediately.
2
Screen assembly
Clean
Use cleaning solvent P-D-680
INSPECTION
3
Screen assembly
Inspect
Replace if torn, broken or dented
INSTALLATION
4
Transmission
a. Gasket
Position
b. Screen
Install
Tighten to 10 to 15 pounds foot torque
NOTE
Fill transmission with oil (para 2-38a(1), step 2).
2-204
|