| |
TM 10-3930-638-24&P
2-30. LIGHT SYSTEMS MAINTENANCE (cont)
c. Rear Blackout Lights (cont).
STEP
LOCATION
ITEM
ACTION
REMARKS
CLEANING (cont)
WARNING
Wear safety glasses when drying parts with compressed air.
Failure to do so could cause serious injury to eyes and possible
blindness. If you hurt your eyes or if a foreign object is blown into
your eyes, seek medical attention immediately.
2
Body (13) and all
Clean
Use cleaning solvent P-D-680.
hardware
Dry thoroughly with compressed air
3
Wire connectors
Clean
Use cleaning solvent P-D-680 on
connectors only
4
Door (2), gasket (3) and
Clean
Wipe with a clean, dry cloth
socket assembly (12)
INSPECTION
5
All hardware
Inspect
Replace if worn, or if threads damaged
6
All wiring
Inspect
Replace if insulation frayed, or if
conductors broken
7
Body (13)
Inspect
Replace if cracked, damaged, or if
threads damaged
8
Door (2) and socket
Inspect
Replace if cracked or damaged
assembly (12)
9
Gasket (3) and
Inspect
Replace if cracked or deteriorated
grommet (14)
INSTALLATION/REPLACEMENT
10
Rear of vehicle
a. Grommet (14)
Install
b. Six screws (1)
Position
In door (2)
c. Six rings (5)
Install
On screws (1)
d. Socket assembly (12)
Position
In body (13)
e. Five screws (9 and 11) Install and
Until socket assembly (12) is securely
and two washers (10)
tighten
mounted
f. Body (13)
Position
g. Two lock washers (8)
Install and
Until body (13) is securely mounted
and cap screws (7)
tighten
2-152
|