TM  10-3930-638-24&P 2-17.   COOLING   SYSTEM   MAINTENANCE   (cont) STEP LOCATION ITEM ACTION REMARKS INSTALLATION/REPLACEMENT  (cont) 12 (cont) CAUTION Exercise care when installing radiator (11). Do not allow radiator fins to be damaged by engine fan or other parts during  installation. b. Radiator (11) Install Carefully lower onto mounts (12) c. Two snubbing Install  and Tighten nut (9) until mount (12) ex- washers (10) tighten pands equally at top and bottom of and nuts (9) frame  member d. Radiator shroud Position Use sling and hoist to lower onto vehicle (8) e. Four cap screws Install  and Until  radiator  guard  is  securely  mounted (7), lock wash- tighten ers (6) and nuts (5) f. Two cap screws Install  and Tighten to 20-30 pounds foot torque (4),  washers  (3), tighten lock  washers (2) and nuts (1) g. Two cap screws Tighten Tighten to 20-30 pounds foot torque (16) and nuts (19) h. Coolant res- Install ervoir (21) i. Overflow hose (14) Install Push on reservoir cap fitting j. Two cap screws, Install Located at top of shroud nuts, lock washers,  and harness clamps k. Two rear black- Connect To wiring harness out lights l. Fan Install if Para  2-17f removed c. Radiator and Shroud (cont). 2-85