TM   10-3930-638-24&P 4-4. TRANSMISSION MAINTENANCE (cont) i. Forward Clutch Assembly (cont). STEP LOCATION ITEM ACTION REMARKS 20 REASSEMBLY   (cont) e. Piston return Compress (cont) spring  spacer  (7) Use sleeve (with cut out) installed in press f. Retaining ring (6) Install g. Outer clutch disc (5) Install h. Inner clutch disc (4) Install i. Outer clutch discs (5), Install inner clutch discs (4) j. Clutch disc backing Install plate  (3) k. Retaining ring (2) Install l. Three forward shaft Install piston rings (1) Install retaining ring through opening in sleeve, remove sleeve Apply light film of OE10 (refer to current lubrication order), then install outer clutch disc with backing ring only Install one only after coating lightly with OE10 (refer to current lubrication  order) Coat remaining discs lightly with OE10 (refer to current lubrication order).  Install  discs  by  alternating outer and inner discs until all are installed. The last disc installed is inner  clutch  disc Change  1      4-227