TM  10-3930-638-24&P 2-15.   FUEL   SYSTEM   MAINTENANCE   (cont) h. Quick Start Kit (cont). STEP LOCATION ITEM ACTION REMARKS CLEANING WARNING Dry cleaning solvent (P-D-680), used to clean parts is toxic and flammable. Wear protective goggles and gloves and use only in a well ventilated area. Avoid contact with skin, eyes, and clothes and don’t breathe vapors. Do not use near open flame or exces- sive heat and don’t smoke when using it. Failure to do so could cause serious injury. If you become dizzy while using cleaning solvent, get fresh air immediately, and get medical attention. If contact with skin or clothes is made, flush with large amounts of water. If contact with eyes is made, wash eyes with water immed- iately, and obtain medical aid immediately. 4 All parts INSPECTION 5 Clamps (6, 10, and 13)  and  brackets (22 and 26) 6 Tube  (2) 7 Spray  nozzle  (3), adapter (4), valve (15), and connector (16) 8 Cylinder  (11) 9 All other parts INSTALLATION/REASSEMBLY/REPLACEMENT 10 Left side of a.  Mounting vehicle bracket  (26) b. Two cap screws (25), lock wash- ers (24) and nuts (23) c. Two nuts (21) d. Two lock wash- ers (20) e. Bracket (22) f. Two lock wash- ers  (18)  and nuts (17) Clean Inspect Inspect Inspect Inspect Inspect Position Install Install Position Position Install Use  cleaning  solvent  P-D-680;  dry  thor- oughly Replace  if  damaged Replace if cracked or crushed Replace  if  cracked  or  threads  damaged Replace if cracked or dented Replace if bent, cracked, or threads damaged On two studs (19) On two studs ( 19) g.  Connector  (16) Install On valve (15) 2-64