COLUMN ENTRIES USED IN THE MAC

TM 10-3930-638-24&P

B-4. COLUMN ENTRIES USED IN THE

B-3 COLUMN ENTRIES USED IN

TOOL AND TEST EQUIPMENT

THE MAC (cont)

REQUIREMENTS

quality control time in addition to the time required to per.

form the specific tasks identified for the maintenance func-

a. Column 1, Tool or Test Equipment Reference Code.

tions authorized in the maintenance allocation chart.

The tool and test equipment reference code correlates with

a maintenance function on the identified end item or com-

ponent.

b. Column 2, Maintenance Catagory. The lowest level of

The symbol designations for the various maintenance levels

maintenance authorized to use the tool or test equipment.

are:

c. Column 3, Nomenclature. Name or identification of the

C . . . . . . . . . . . . . . . . . . . . . . . . . . . Operator or crew

tool or test equipment.

O . . . . . . . . . . . . . . . . . . . . . . . Organizational maintenance

d. Column 4, National/NATO Stock Number. The Nation-

F . . . . . . . . . . . . . . . . . . . . . Direct support maintenance

al or NATO stock number of the tool or test equipment.

H . . . . . . . . . . . . . . . . . . . . . .General support maintenance

e. Column 5, Tool Number. The manufacturer's part

D . . . . . . . . . . . . . . . . . . . . . . . . . . . . Depot maintenance

number.

B-5. EXPLANATION OF COLUMNS IN

e. Column 5, Tools and Equipment. Column 5 specifies,

SECTION IV

by code, those common tool sets (not individual tools) and

special tools, test, and support equipment required to per-

a. Reference Code. The code scheme recorded in column

form the designated function.

6, section II.

f. Column 6, Remarks. This column shall contain a letter

b. Remarks. This column lists information pertinent to

code in alphabetic order which shall be keyed to the re-

the maintenance function being performed as indicated

marks contained in section IV.

on the MAC section II.

B-2