DISASSEMBLY (cont) - TM-10-3930-638-24-P1002

TM 10-3930-638-24&P

4-4. TRANSMISSION MAINTENANCE (cont)

i. Forwrd Clutch Assembly (cont).

REMARKS

ACTION

ITEM

LOCATION

STEP

DISASSEMBLY (cont)

Retaining ring (6)

Remove and

Remove through opening in sleeve

discard

Release and

Piston return spring

Carefully and slowly release pressure on

spacer (7)

remove

spring, then remove sleeve

Five piston return

Remove

springs (8)

Forward shaft drum

Invert

and plug assembly

(12)

Clutch piston (9)

Remove

Tap forward shaft drum and plug assembly

on block of wood to remove clutch piston

Outer clutch piston seal

Remove and

(10)

discard

Inner clutch piston

Remove and

seal (11)

discard

CLEANING

WARNING

Dry cleaning solvent (P-D-680), used to clean parts is toxic and

flammable. Wear protective goggles and gloves and use only in a

well ventilated area. Avoid contact with skin, eyes, and clothes

and don't breathe vapors. Do not use near open flame or exces-

sive heat and don't smoke when using it. Failure to do so could

cause serious injury. If you become dizzy while using cleaning

solvent, get fresh air immediately, and get medical attention. If

contact with skin or clothes is made, flush with large amounts of

water. If contact with eyes is made, wash eyes with water immedi-

ately, and obtain medical aid immediately.

WARNING

Wear safety glasses when drying parts with compressed air. Fail-

ure to do so could cause serious injury to eyes and possible blind-

ness. If you hurt your eyes or if a foreign object is blown into

your eyes, seek medical attention immediately.

4-224