 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 10-3930-638-24&P
4-4.
TRANSMISSION
MAINTENANCE
(cont)
f. Reverse and Second Clutch Assembly (cont).
REMARKS
ACTION
ITEM
LOCATION
STEP
REASSEMBLY (cont)
CAUTION
Use care to not damage inner and outer seals.
Install
a. Clutch piston (19)
Reverse
13
b. Piston return spring position
clutch
spacer (15)
side
Position first piston return spring
Install
c. Five piston return
with curved side up, then alternate
springs (17)
remaining piston return springs
On drum and plug assembly (18)
Posit ion
d. Retaining ring (16)
Use sleeve installed in press
Compress
e. Piston return spring
spacer (15)
Install retaining ring through opening in
Install
f. Retaining ring (16)
sleeve; remove sleeve after installation
Install one outer clutch disc
Install
g. outer clutch disc (14)
Install one
Install
h. Inner clutch disc (13)
Install remaining discs, alternating between
Install
i. Outer clutch disc (14),
outer clutch discs and inner clutch discs.
inner clutch disc (13)
The last disc installed is inner clutch disc
Install
j. Clutch disc backing
plate (12)
Install
k. Retaining ring (11)
Use mallet and sleeve
Install
l. Clutch driven gear
bearing (10)
Instsll
m. Retaining ring (9)
Install
n. Bearing spacer (7)
Install
o. Retaining ring (6)
CAUTION
Do not force this procedure.
Align splines on hub with internal teeth of
Install
p. Reverse clutch gear
discs. Tap hub gently into. position. Hub
and hub assembly
splines must be in full position with inter-
(5)
nal teeth of all discs
Change
1
4-203
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals