 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 10-3930-638-24&P
4-3. FUEL SYSTEM MAINTENANCE (cont)
b. Fuel Injection Pump (cont).
REMARKS
ITEM
ACTION
LOCATION
STEP
TESTING (cont)
41
(cont)
Fuel delivery shall be 10-13 cubic MM/
d. Operate
pump at
stroke
750
10 RPM
Adjust torque screw (52) until fuel delivery
1. Torque screw
a. Operate
of 58-60 cubic MM/stroke is obtained
pump at
adjustment
2100
10RPM
Fuel delivery shall be 25 cubic MM/stroke
b. Operate
pump at
15010
RPM
Fuel delivery shall be 5 cubic MM/stroke
Operate pump at
m. Governor cut-
maximum
2350 10 RPM
off check
Disconnect + 24 Vdc from solenoid; fuel
n. Shutoff check
Operate pump at
delivery shall be 3 cubic MM/stroke
210010 RPM
maximum
25-30 pounds inch torque
Tighten
o. Nut (40, 42)
Tighten
25-30 pounds inch torque
p. Nut (50)
Install timing line covers (125) in its place.
Remove
q. Two advance
Tighten four screws (1 24) to 15-20
windows
pounds inch torque
Lock wire in
r. Throttle
wide open
throttle
position
Remove from
s. Pump
test stand
Thread lock
42
End plate
Four screws (85)
wire through
(88)
head of each
screw
Lock wire
Rear screw (10)
43
Governor
together
and torque
control
cover (22)
screw (52)
Lock wire
44
Screws (41 and
Throttle
individually
43)
shaft
to lever
assembly
(37)
4-131
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals