 |
|||
|
|
|||
|
Page Title:
Flywheel and Flywheel Housing (cont). |
|
||
| ||||||||||
|
|
 TM 10-3930-638-24&P
4-2. ENGINE MAINTENANCE (cont)
e. Flywheel and Flywheel Housing (cont).
ITEM
REMARKS
ACTION
STEP
LOCATION
REMOVAL
1
Flywheel
a. Three cap screws (1)
Remove
If necessary
housing (17),
lock washers (2)
front
and washers (3)
b. Dust cover (4)
Remove
If necessary
a. Ring gear (8)
2
Flywheel
Align timing
Insert screwdriver into timing hole in fly-
assembly (7)
mark with
wheel housing and engage ring gear teeth
roll pin
to move gear to align
(19)
b. Four cap screws (5)
Remove
and washers (6)
c. Flywheel assembly
Remove
(7)
d. Ring gear (8)
Remove
Use drift to drive off fly wheel (9) only if
gear requires replacement
3
a. Cap screw (10)
Flywheel
Remove
housing (17),
and lock washer (11)
top
b. Cover (12)
Remove
a. Two nuts ( 13)
Remove
4
Flywheel
housing (17),
and lock washers (14)
rear
b. Two cap screws (15)
Remove
and lock washers
(16)
c. Flywheel housing
Use chain hoist securely fastened to fly-
Remove
(17)
wheel housing
5
Cylinder block
TWO studs (18)
Remove
Only if damaged
6
Flywheel
Roll pin (19)
Remove
Only if damaged
housing (17),
timing hole
CLEANING
WARNING
Dry cleaning solvent (P-D-680), used to clean parts is toxic and
flammable. Wear protective goggles and gloves and use only in a
well ventilated area. Avoid contact with skin, eyes, and clothes
and don't breathe vapors. Do not use near open flame or exces-
sive heat and don't smoke when using it. Failure to do so could
cause serious injury. If you become dizzy while using cleaning
solvent, get fresh air immediately, and get medical attention. If
contact with skin or clothes is made, flush with large amounts of
water. If contact with eyes is made, wash eyes with water immedi-
ately, and obtain medical aid immediately.
4-38
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals