Tilt Cylinder Assemblies (cont). - TM-10-3930-638-24-P0728

TM 10-3930-638-24&P

3-30. HYDRAULIC LIFT SYSTEM MAINTENANCE (cont)

b. Tilt Cylinder Assemblies (cont).

ITEM

LOCATION

REMARKS

STEP

ACTION

REMOVAL

WARNING

Dry cleaning solvent (P-D-680), used to clean parts is toxic and

flammable. Wear protective goggles and gloves and use only in a

well ventilated area. Avoid contact with skin, eyes, and clothes

and don't breathe vapors. Do not use near open flame or exces-

sive heat and don't smoke when using it. Failure to do so could

cause serious injury. If you become dizzy while using cleaning

solvent, get fresh air immediately, and get medical attention. If

contact with skin or clothes is made, flush with large amounts of

water. If contact with eyes is made, wash eyes with water immedi-

ately, and obtain medical aid immediately.

Vehicle side,

a. Hose fitting (1 and 2)

Clean, loosen,

Use clean cloth moistened with cleaning

left or right

disconnect and

solvent P-D-680

cap

b. Adapter (3)

Remove

Cap tilt cylinder port

c. Elbow (4)

Remove

Cap tilt cylinder port

d. Two retaining rings (5)

Remove

e. Pin (6)

Remove

f. Nut (7), lock washer

(8), and cap screw (9)

g. Rod (10)

Remove

h. Pin(n)

Remove

i. Tilt cylinder assem-

Remove to clean

work area

bly (12)

DISASSEMBLY