Steering Wheel and Column (cont). - TM-10-3930-638-24-P0663

TM 10-3930-638-24&P

3-24. STEERING SYSTEM MAINTENANCE (cont)

a. Steering Wheel and Column (cont).

REMARKS

ITEM

LOCATION

ACTION

STEP

REMOVAL

Loosen and

Steering

a. Nut (1)

wheel

remove

Use suitable wheel puller if necessary

b. Steering wheel (4)

Lift and remove

DISASSEMBLY

Steering

a. Nut (5), lock washer

Loosen and

column

(6) and cap screw

remove

(7)

Loosen and

b. Four screws (8)

remove

c. Cover (9) and seal

Remove

Remove all seal residue from cover (9)

(10)

and jacket tube (15). Discard seal (10)

d. Two screws (11) and

Loosen and

flat washers (12)

remove

e. Horn contact assem-

Lift and remove

bly (13)

f. Jacket tube (15) with

Lift and remove

bushing (14)

g. Bushing (14)

If necessary for replacement

Remove from

jacket tube (15)

h. Two springs (16)

Lift and remove

Pull and remove

i. Horn wire (17)

From top of wheel tube (23)

CAUTION

Do not strike pins (18) with heavy hammer blows in the follow-

ing step. Heavy hammer blows may damage bearing in steering

gear.

j. Two dowel pins (18)

Remove and

Lightly tap out using 5/16 inch brass rod

discard

and hammer

k. Coupling (19) and

Remove and

wheel tube (23)

separate

Remove

From upper cover of steering gear

l. Clamp (20)

Loosen and

m. Screw (21)

remove

n. Horn contact assem-

Pull and remove

From smooth end of wheel tube (23)

bly (22)

3-157