Rear Axle Differential Carrier Assembly (cont).

TM 10-3930-638-24&P

3-20. AXLES AND DIFFERENTIAL CARRIER ASSEMBLIES MAINTENANCE (cont)

d. Rear Axle Differential Carrier Assembly (cont).

REMARKS

ITEM

ACTION

LOCATION

STEP

INSTALLATION (cont)

Para 2-39f, steps 12i and 12j

Side of vehicle

Install

Two axle shafts

Fill with lubricant Para 2-39d, steps 2 and 4

Differential carrier

Axle assembly

assembly

Differential

Rear drive shaft assembly Connect to differ- Para 2-39c, step 9

ential companion

carrier assembly

yoke

Para 2-39b, step 1

Disconnect

Center drive shaft

Transmission

assembly

parking brake

flange

Tires and wheels

Raise off ground,

Rear axle

place jack stands

under axle

housing

WARNING

Don't allow anyone to stand in front of vehicle during following

step; be sure front axle is securely blocked. Vehicle could slip off

jack stands and hit personnel standing in front causing serious

injury or death.

a. Start engine and operate at idle speed

Operator's com-

b. Place transmission direction selector in F (forward) position

partment

and place speed selector in 3 (third) position

c. Disengage parking brake and operate vehicle for five minutes

at full throttle to assure satisfactory lubrication of differ-

ential carrier assembly parts

d. Turn engine off and apply parking brake

Remove jack stands;

Tires and wheels

Rear axle

lower to ground

Para 2-39b, step 10

Connect

Center drive shaft

Transmission

assembly

parking brake

flange

3-151