Front Axle Differential Carrier Assembly (cont).

TM 10-3930-638-24&P

3-20. AXLES AND DIFFERENTIAL CARRIER ASSEMBLIES MAINTENANCE (cont)

c. Front Axle Differential Carrier Assembly (cont).

REMARKS

ITEM

STEP

LOCATION

ACTION

INSTALLATION (cont)

Install

Para 2-39f, steps 12i and 12j

Two axle shafts

Side of

vehicle

Differential carrier

Fill with lubricant Para 2-39d, steps 2 and 4

Axle assembly

assembly

Connect to differ- Para 2-39a, step 12

Front drive shaft

Differential

assembly

ential companion

carrier

yoke

assembly

Disconnect

Para 2-39c, step 1

Rear drive shaft

Transmission

assembly

rear output

flange

Tires and wheels

Raise off ground,

Front axle

place jack stands

under axle

housing

Don't allow anyone to stand in front of vehicle during following

step; be sure front axle is securely blocked. Vehicle could slip off

jack stands and hit anyone standing in front causing serious injury

or death.

a. Start engine and operate at idle speed

Operator's com-

b. Place transmission direction selector in F (forward) position

partment

and place speed selector in 3 (third) position

c. Disengage parking brake and operate vehicle for five minutes

at full throttle to assure satisfactory lubrication of differ-

ential carrier assembly parts

d. Turn engine off and apply parking brake

Remove jack

Tires and wheels

Front axle

stands; lower

to ground

Para 2-39c, step 10

Rear drive shaft assembly

Connect

Transmission

rear output

flange

3-146